TrendNET 12 port Gigabit PoE+ Switch

Layer2 Managed Hardened Industrial

Trendnet TI-PG1284i. Switch type: Managed, Switch layer: L2+. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 8, Console port: RJ-45. Full duplex. MAC address table: 16000 entries, Switching capacity: 24 Gbit/s. Networking standards: IEEE 802.1D,IEEE 802.1Q,IEEE 802.1ab,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.3,IEEE.... Power over Ethernet (PoE)

TI-PG1284I


710931160598
  • 1 in magazzino

Maggiori Informazioni

TRENDnet’s 12-Port Hardened Industrial Gigabit PoE+ Layer 2+ Managed DIN-Rail Switch, model TI-PG1284i, has eight Gigabit PoE+ ports, four Gigabit SFP slots, and a 240 Watts PoE budget. The switch is equipped with an IP30 rated metal enclosure and designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate within a wide temperature range (- 40 – 75 °C (- 40 - 167°F)) for harsh environments. L2+ management include features such as PoE port control, 802.1Q / Q-in-Q VLAN, multicast, spanning tree, link aggregation, QoS, IPv4 / IPv6 static routing, ACLs, and 802.1X which allow for network integration flexibility.

Industrial Hardened Design
Equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments.

Integration Flexibility
Managed features include PoE control, IP static routing, access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration.

Fault Tolerance
Features dual redundant power inputs (Primary and RPS) from external power sources and an output alarm relay to indicate the event of input power failure.

Full PoE+ Power Budget
Supplies up to 30 Watts of PoE / PoE+ power per port with a 240 Watts PoE power budget

Network Ports and Capacity
8 x Gigabit PoE+ ports and 4 x Gigabit SFP slots allow for a 24 Gbps switching capacity and 1 x console (RJ-45 to RS-232) for out-of-band management

Integrated DIN-Rail Mount
IP30 rated metal enclosure with integrated DIN-Rail mounting hardware

Full PoE Control Per Port
PoE control features include enabling/disabling PoE and class, power priority, PD alive check, scheduling, and power delay per port using CLI or web management.

Traffic Management
Managed features include 802.1Q / Q-in-Q / GVRP / MAC & Protocol-Based VLAN, IGMP v1 / 2 / 3, IGMP Snooping, MLD, MVR, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP / MSTP spanning tree, static and dynamic link aggregation, and Xpress Ring + ERPS protection for flexible network integration.

Layer 2+ Management
Offers IPv4 / IPv6 static or DHCPv4 / v6 assignment, IPv4 / IPv6 static routing and proxy ARP, DHCP server / relay / option 82, and DHCP server snooping / screening to filter out unauthorized DHCP servers

Access Controls
Management via HTTPS and SSH protocols and features such as trusted host, ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, IP Source Guard provide layered network access controls.

System Monitoring
Monitoring features include SNMP v1 / v2c / 3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, SFP DDMI, and ModBus / TCP.

Redundant Power
Dual redundant power inputs (primary and RPS) with overload current protection

Alarm Output
Alarm relay output triggered by power failure of primary and/or redundant power and failure per port (DIP switch)

Jumbo Frame
Sends larger packets, or Jumbo Frames (up to 10 K)

Wide Temperature
Hardened switch is rated for an operating temperature range of - 40 to 75 °C (-40 to 167 °F)

Electro Magnetic Compliance
Complies with IEC61000-6-2 EMC generic standard immunity for industrial environments

Shock and Vibration Resistant
Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6)

LED Indicators
LED indicators convey power, redundant power, alarm, SFP, PoE, and network port status

Grounding Point
Grounding point protects equipment from external electrical surges

*EET non può essere ritenuta responsabile per errori in immagini, descrizioni e specifiche rilasciate da Icecat
Caratteristiche di gestione
Tipo interruttoreManaged
Livello del commutatoreL2+
Supporto qualità del servizio (QoS)
Registro evento di sistema
Supporto MIBRFC 1213, RFC 1493, RFC 1643, RFC 1757
Gestione web-based
Ispezione ARP
Connettività
Quantità di porte RJ-458
Tipo di porte RJ-45Gigabit Ethernet (10/100/1000)
Quantità di slot per modulo SFP4
Console portRJ-45
Collegamento in rete
Standard di reteIEEE 802.1D,IEEE 802.1Q,IEEE 802.1ab,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3at,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z
Supporto 10G
Full duplex
Mirroring della porta
Raggruppamento link
Controllo Broadcast storm
Apertura albero di protocollo
Auto-apprendimento dell'indirizzo MAC supportato
Trasmissione dati
Dimensioni tavola MAC16000 entries
Capacità di commutazione24 Gbit/s
Throughput17.86 Mpps
Supporto Jumbo Frames
Frame Jumbo10000
Collegamento in rete
VLAN support
Caratteristiche della LAN virtualeTagged VLAN,Protocol-based VLAN
Numero di VLA256
Funzioni Multicast
Supporto multicast
Tabella degli indirizzi MAC multicast256 entries
Sicurezza
Caratteristiche DHCPDHCP server
Lista di controllo accesso (ACL)
Funzione IGMP snooping
Algoritmi di sicurezza supportati802.1x RADIUS,HTTPS,SNMP
Protezione contro i loop back
AutenticazionePort-based authentication
Design
Colore del prodottoBlack
Indicatori LED
Codice di protezione internazionale (IP)IP30
Montaggio su rail DIN
CertificazioneCE, FCC
Trasmissione dati
Buffer di memoria di pacchetto128 MB
Prestazione
Tempo medio tra guasti (MTBF)322805 h
Gestione energetica
Supporto Redundant power supply (RPS)
Tensione di ingresso AC100 - 240 V
Frequenza di ingresso AC50 - 60 Hz
Voltaggio di uscita48 V
Corrente d'uscita5 A
Consumo energetico (max)260 W
Power over Ethernet (PoE)
Supporto Power over Ethernet (PoE)
Quantità di porte Power over Ethernet plus (PoE+)8
Potenza Power over Ethernet (PoE) per porta30 W
Bilancio energetico totale del PoE240 W
Condizioni ambientali
Intervallo temperatura di funzionamento-40 - 70 °C
Range di umidità di funzionamento0 - 95%
Dimensioni e peso
Larghezza170 mm
Profondità132 mm
Altezza50 mm
Peso920 g
Dati su imballaggio
Guida rapida
Morsettiera inclusa
CD di installazione
Altre caratteristiche
Morsettiera
Informazioni aggiuntive
Garanzia3 anni
CATALOGClicca per vedere catalog
DatasheetClicca per vedere datasheet
*EET non può essere ritenuta responsabile per errori in immagini, descrizioni e specifiche rilasciate da Icecat
Add to your favorites
Eliminare
Eliminare dalla lista
Recentemente visitato
Avete visitato questa pagina recentemente
Favorite Item
The item is in your favorite items list.
Notify me
Get an email <br/> when this product <br/> is available in our stock
Pricedrop
Rebate is based on standard prices and has been deducted from the listed price